How To Reset Tp

This document describes how to remix và then configure the TP-Link wireless router that may have sầu been supplied with your haiermobile.vn SME service. You may need lớn bởi this if you have sầu made changes lớn the router which have sầu resulted in you losing access khổng lồ the device, or due to lớn a forgotten password. These instructions are also valid for a scenario in which the router has accidentally been reset/erased.

Bạn đang xem: How to reset tp

Reset the router

With the routerpowered on, press và hold the RESETbutton on the baông xã of the router for more than 10 seconds until the system LED starts lớn flash quickly. Then release the button và wait for the router khổng lồ reboot to lớn its factory default settings.

Preparation nguồn up the TP-link router. Connect an ethernet cable between port 1 of the haiermobile.vn provided NTU and the xanh INTERNET port of the TP-Link router. Connect a computer to any of the TP-Link’s yellow ethernet ports using an ethernet cable. Set up your computer

Normally your computer will will be mix up to automatically obtain it"s IP settings. In the case that it isn"t và you have sầu trouble accessing the website management of the router, you can follow the below instructions for Windows computers. The SME haiermobile.vn team (sme-haiermobile.vn
haiermobile.vn.ph) can also direct you to instructions for other platforms if required.

On your computer, go khổng lồ Control Panel > Network & Internet > Network Connections. Cliông xã on Ethernet > Properties. Cliông xã Internet Protocol Version 4 and cliông xã Properties at the bottom. On the General tab, make sure that it is mix to ‘Obtain an IP.. address automatically‘ & ‘Obtain DNS Server address automatically’.

*

To kiểm tra that you have sầu already obtained a dynamic IPhường address, double clichồng on the Ethernet ibé và cliông xã Details. You should get an IPhường that starts with 192.168.0.

Xem thêm: Ớt Bột Hàn Quốc Mua Ở Đâu Tphcm, Ớt Bột Hàn Quốc Làm Kim Chi Giá Rẻ Tại Tphcm

*
Set up the router xuất hiện a web browser and type in 192.168.0.1 Enter the username và password in the login page. The mặc định username và password for TP-Link devices is admin/admin.

*

When you first logged into this device, it will ask you for a new password. haiermobile.vn will by default phối the username & password khổng lồ the same value as for your PPPoE username & password. haiermobile.vn SME haiermobile.vn can provide these details on request.

*

After you have successfully changed the mặc định username và password, it will redirect you khổng lồ the Quick Setup và will ask you for the Time Zone. SelectGMT+08:00 lớn have the same timezone in Philippines & click Next.

*

For Internet Connection Type, select PPoE & click Next.

*

Enter your PPPoE username and password (as supplied buy haiermobile.vn) in the textboxes và click Next.

*

For the Wireless Settings... Check the checkbox labeled “Enable Wireless Radio” khổng lồ enable the radio. Network Name (SSID) is what you can see when you want khổng lồ connect to lớn your Wireless network. haiermobile.vn will have phối this to haiermobile.vn_ The Password textbox contains the password that you need to connect to your wireless network. Set your password here. The mặc định password is listed on a small sticker on the back of the device. Leave the ‘Hide SSID’ checkbox unchecked if you want your Wireless Network to be visible. haiermobile.vn will have sầu this unchecked. If you have sầu configured all that is needed, cliông chồng Next.
*
After you cliông chồng Next, it will show you a summary of the things you configured. If everything looks correct cliông xã Save sầu, or if you have something you want khổng lồ change, click Baông xã.

*

After you cliông xã Save sầu, the router will redirect you to a page as below. Just cliông chồng Log In Later.

*

It will then tell you that you have complete the Quiông chồng Setup Process. Cliông chồng Finish.

*

Once finished, it will redirect you to lớn a network bản đồ. Go lớn Advanced Tab > Network > Internet, set MTU Size to lớn 1492 and cliông xã Save sầu.

*

Now disable NAT Boost.Go khổng lồ Advanced Tab > System Tools. Unkiểm tra the box labeled "NAT Boost" & clichồng Save sầu.
*
This will cause the router reboot so the router will ask you if you want lớn continue. Click OK.

*

The router will now reboot.

*

Once it has rebooted, to lớn Advanced tab > System Tools > Traffic Statistics & turn it on. Cliông xã Save. You are now finished with the cài đặt.

*